+213 (0) 23 61 19 31 +213 (0) 23 61 19 32



The Bungard CCD/ATC/XL is a high quality Computer Controlled Drilling machine with Automatic Tool Change (ATC). The ATC/XL as well as all other CCDs allows directly processing of Excellon / Sieb&Meyer drill data or HP/GL route data for producing PCBs (drilling, cut-out-routing, isolation milling) or routing/ engraving plastics, aluminium and other metals.

The CCD/ATC/XL differs from the CCD/MTC/XL by the automatic 25-slot tool changer. The work space is the same. Compared with the CCD/ATC the XL has a larger work space (500×600 mm in contrast to 495×325 mm with the CCD/ATC) and the number of tool slots (25 instead of 16).

The ATC is ideal for very big and complex PCBs with many different drill sizes and for special applications

Techn. Data

Power supply: 110-240 V, 50-60 Hz + vacuum cleaner (1500 W)

Range of RPM: 3.000 – 63.000

Traveling speed: 1 – 9000 mm/min

Software resolution: 0,0001 mm (0,01 µm)

Mechanical resolution: step resolution: Software selectable: 1 mil, ½ mil, ¼ mil (= 6.35 μm) from June 2016: 3,175 µm

Tool diameter: 0.1 mm – 3,175 mm (recommended, bigger tool diameter possible)

Position accuracy: 20 ppm (0.002%) over the entire work space:

Maximum position speed per axis: 9000/mm/min (=150 mm/s)

Maximum working speed per axis: 9000/mm/min (=150 mm/s), individual setting on a per-tool basis, independent from position speed

Drill speed: 5/s (= 18.000 holes/h = 300 holes/min)

Required accessories: Computer

Board fixation: span fixing, clamp fixing, reference pin system, stack processing possible
Option: vacuum fixation


Weight: 49 kg

Dimensions (LxWxH): 950 x 950 x 300 mm

Work area: 500 x 600 x 38 mm

Tool change: 25


Dimensions (LxWxH):950 x 950 x 300 mm

Work area:500 x 600 x 38 mm

Traveling speed:1 – 9000 mm/min

Software resolution:0,00001 mm (0,01 µm)




There are no reviews yet.

Be the first to review “CCD/ATC/XL”

Your email address will not be published. Required fields are marked *