PHONE

+213 (0) 23 61 19 31 +213 (0) 23 61 19 32

EMAIL

fabrication@almitech-dz.com

CCD/MTC

The Bungard CCD/MTC is a high quality computer controlled drilling and milling machine with semi-automatic tool change (MTC = manual tool change).

The CCD/MTC differs from the CCD/2 by a larger working area (325×495 mm in contrast to 270×325 mm) and by a separate controller.

Compared to the ATC models, the software interrupts the operation during the tool change and the new tool is changed manually (turning the knob changes by a quarter turn; motors remaine empowered and hold the position).

With the sturdy spindle and the good fixation of the tool in the chuck the Bungard CCD / MTC is perfectly fi tted for routing or engraving plastics, aluminium and other metals. 19 inch rack boards can also be processed.

Techn. Data

Power supply: 110-240 V, 50-60 Hz + vacuum cleaner (1500 W)

Range of RPM: 30.000 – 63.000 from June 2016: 3.000 – 63.000

Traveling speed: 1 – 9000 mm/min

Software resolution: 0,0001 mm (0,1 µm) from June 2016: 0,01 µm

Mechanical resolution: step resolution: Software selectable: 1 mil, ½ mil, ¼ mil (= 6.35 μm) from June 2016: 3,175 µm

Tool diameter: 0.1 mm – 3,175 mm (recommended, bigger tool diameter possible)

Position accuracy: 20 ppm (0.002%) over the entire work space:

Maximum position speed per axis: 9000/mm/min (=150 mm/s)

Maximum working speed per axis: 9000/mm/min (=150 mm/s), individual setting on a per-tool basis, independent from position speed

Drill speed: 5/s (= 18.000 holes/h = 300 holes/min)

Required accessories: Computer

Board fixation: span fixing, clamp fixing, reference pin system, stack processing possible
Option: vacuum fixation

CCD/MTC

Weight: 35 kg

Dimensions (LxWxH): 700 x 800 x 300 mm

Work area: 325 x 495 x 38 mm

Tool change: no

characteristics

Dimensions (LxWxH):700 x 800 x 300 mm

Work area:325 x 495 x 38 mm

Traveling speed:1 – 9000 mm/min

Software resolution:0,00001 mm (0,01 µm)

More

ccd_manual_e

Reviews

There are no reviews yet.

Be the first to review “CCD/MTC”

Your email address will not be published. Required fields are marked *