Splash Center
Splash Center/Splash Center XL
Laboratory etching machine with static and spray rinse, integrated developer tank, a reserve tank for e.g. chemical tinning and a squeeze dryer. The Splash-Center is suitable for double-sided PCBs. Special emphasis was put on ergonomical and clean etching and rinsing as well as on low chemical drag out.
- Brand
- General information
- Features
- Splash Center
- Splash Center XL
- Etching compartment
- Video
- Downlaod
- Reviews (0)
General information
Power supply:230 V~, 50 Hz, approx. 1,5 kW (XL)
Dimensions (LxWxH):1160 x 770 x 1200 mm (XL)
Etchingformat:300 x 400 mm (XL)
Tank capacity:1 x 40 l + 1 x 24 l + 3 x 15 l (XL)
Features
- 5 ball valves to drain all tanks, cover protected from the front side.
- All tanks with lids
- Integrated drip tray for all tanks, sure-footed about 120 mm above the ground
- Integrated mechanical squeeze dryer
Splash Center
Power supply: 220 V~, 50 Hz, approx. 1,5 kW
Dimensions (LxWxH): 1000 x 670 x 1200 mm
Working Level: 900 mm
Etchingformat: 210 x 300 mm
Tank capacity: 1 x 25 l + 1 x 9 l + 3 x 7 l
Weight: approx. 46 kg
Splash Center XL
Power supply: 220 V~, 50 Hz, approx. 1,5 kW
Dimensions (LxWxH): 1160 x 770 x 1200 mm
Working Level: 900 mm
Etchingformat: 300 x 400 mm
Tank capacity: 1 x 40 l + 1 x 24 l + 3 x 15 l
Weight: approx. 56 kg
Etching compartment
- Maintenance free etching system with solid stream nozzles
- Etching speed of 35 µm Cu within 90 seconds (warm Fe-III-Cl).
- Big window to the etching chamber made from transparent PVC.
- Maximum board size: 210 x 300 mm /Splash-Center XL: 300 x 400
- Line resolution better than 0.1 mm (100 µm)
- Suitable for all common etchants. Fe-III-Cl recommended
- Lid to the etching chamber with safety switch
- Removable board holder made from Titanium and PVC. Can be locked in drip-off position
- Easy access to the etching chamber.
- Strong 1000 W Quarz heater, etching temperature controlled by thermostat
- Overheat fuse
- Digital timer with count down, auto reset and beeper
- Integrated rinsing zone with drip off holder.
- 3 cog valves for all tanks
- Suitable for spray developing
Video
Downlaod
Reviews
There are no reviews yet.