PHONE

+213 (0) 23 61 19 31 +213 (0) 23 61 19 32

EMAIL

fabrication@almitech-dz.com

SprintDryer

The SprintDryer can be connected in any way to any type of sprint, with a suitable dryer available for each throughput width of the Sprint series. Of course, you can also use the  SprintDryer together with the DL500 or as a stand-alone-unit with or without an underframe and with or without an inlet or outlet table.
First the wet board is pre-dryed in two squeeze zones. After that the board is completely dried in a hot-air stream. The cross flow fan with integrated heating element generates uniform laminar airflow across the whole working width.
The board runs automatically through the drying zones of the SprintDryer.
The speed of the roller drive is continuously adjustable in a wide range. Special beard roller assures a uniform transport of the PCB through the machine. The construction of the rollers allows drying boards with different thicknesses.

 

 

Brand

BUNGARD

General info

Working width: 300 mm
Board thickness:0,2 – 4 mm
Minimum board length: 80 mm
Speed of passage: 0 – 2.0 m /min

Features

  • continuous drying
  • Variable transport speed
  • Suitable for different board thickness
  • Low surface temperature
  • Short heating-up time
  • Huge area capacity
  • Table model
  • High grade processing

SprintDryer 3000

Working width: 300 mm

Board thickness: 0,2 – 4 mm

Minimum board length: 80 mm

Speed of passage: 0 – 2.0 m /min

Heating up time: 15 s

Dimensions (LxWxH): 490 x 630 x 750 mm (1150 mm with underframe)

Weight: approx. 40 kg

Electrical connection: 230 V AC / 50/60 Hz

Power consumption: 3500 W

Heater: 0 – 62 °C adjustable

SprintDryer 4500

Working width: 450 mm

Board thickness: 0,2 – 4 mm

Minimum board length: 80 mm

Speed of passage: 0 – 2.0 m /min

Heating up time: 15 s

Dimensions (LxWxH): 490 x 700 x 750 mm (1150 mm with underframe)

Weight: approx. 60 kg

Electrical connection: 230 V AC / 50/60 Hz

Power consumption: 3500 W

Heater: 0 – 62 °C adjustable

SprintDryer 6000

Working width: 600 mm

Board thickness: 0,2 – 4 mm

Minimum board length: 80 mm

Speed of passage: 0 – 2.0 m /min

Heating up time: 15 s

Dimensions (LxWxH): 490 x 850 x 750 mm (1150 mm with underframe)

Weight: approx. 80 kg

Electrical connection: 230 V AC / 50/60 Hz

Power consumption: 3500 W

Heater: 0 – 62 °C adjustable

Download

Reviews

There are no reviews yet.

Be the first to review “SprintDryer”

Your email address will not be published. Required fields are marked *