Reflow oven T-5
1) T-5 reflow oven worked with hot wind to solder PCB, support most normal components, LED and kinds of IC.
2) T-5 reflow oven worked with hot wind to solder PCB, support most normal components, LED and kinds of IC.
3) Crawler-type structure matched with five heating zones (3 up/ 2 down) can make inside temperature more accurate and well-proportioned, just need 15-20min to reach the working temperature.
4) Using AC motor to drive the conveyor belt, chain type transmission way. Speed adjustment is controlled by automatic electronic analog switch, which sensitivity no more than 1 degree,control accuracy ±10mm/min.
|Components Max Height||55|
|Max Speed of Conveyor||1200|
|5 heating zones||First:Fast preheat zone
Fourth/Fifth:Bottom-side heat zones
(Each zones adapts independent heating/cooling ways,cooling zone belongs to strong wind refrigerating systeam.)